CNC Working Center for Window Frames TITANIUM

TITANIUM is the result of years of experience and innovation in the woodworking machinery production. Thank to its level of technology and to a blocking system, which allows to calculate the dimension of the pieces in automatic, this working center ensures high productivity in a reduced time. High flexibility of the tenoning and profiling spindles, ease of use and a total cover of the machine, in order to reduce noises and dust, are all features which make TITANIUM a leader machine in its sector.



TITANIUM can work two pieces at a time. The system of axes interpolation allows to do tilted tenons +/- 60° and to keep the piece positioned perpendicularly to the machine. The clamp with semiautomatic rotation allows the operator to avoid manual repositioning of the pieces for the second tenon working. Double guides of the clamp for better steadiness.




During profiling the piece is held by a pneumatic counterguide. The working can be done using “splitting” method: the three shafts work at the same time forming a combined profile. At the end of the machine it is possible to use a roller chute for return of the pieces to the operator.


There is the possibility to profile sashes using up to three shafts at a time. The first turns clockwise and anticlockwise, the second is used for profiling and the third makes a hardware groove on requested side.


The woodworking center TITANIUM does the squaring of the sashes with the use of a carriage that can hold a sash up to 600 mm wide. It is equipped with a pull out support beam for use when squaring large size sashes.
Software installed on PC with operating system Windows XP is user friendly and enables working sequence or order mode. The data transmission is done by Ethernet connection and USB ports
Pneumatic control of vertical saw movement. Tenoning spindle with electronic vertical adjustment
Jolly antichip device with quick range
Two points for piece holding: one is near to milling cutters and another at the middle of the piece
Feed wheels with adjustable pneumatic pressure & small distance between wheel centers. Blowers for table surface cleaning
Pneumatic counterguide ensures rapid change from one section size to another
On the profiling side there are 2 profiling spindle and 1 vertical spindle (2 positions) for hardware grooving. Radius unit and glass stop recovery unit are separated



The TITANIUM + Pantograph solution gives the possibility to do tenoning and perforation workings within one working cycle. All axes are numerically controlled in vertical and horizontal sense. Brushless motors. Electric spindle of 7,5 kW and HSK 63F quick coupling. Axis C with 360° rotation for aggregates like cutting heads and angular countershafts. Linear and circular interpolation of all pantograph axes.



Some examples of hardware that can be inserted thanks to the working cycles or macros of pantograph already installed on the pantograph computer.
Programmes generated by other software can be easily transmitted by Ethernet and USB ports.



Possibility to have 1 or 2 interchangeable shafts (optional) with overhead crane lifting system and special cone bearing trolley. HSK B100 quick coupling system enables the rapid change of 320 mm tool groups. The number of the tooling is unlimited.



Mini-Max working lenght 250-2800 mm
Mini-Max working width 40-200 mm
Automatic inclination +/- 60°


Circular saw unit

Ø Saw blade 400 mm
Cutting height 120 mm
Pneum. saw adjustment  


Tenoning spindle

Ø Spindle 50 mm
Spindle lenght 320 mm
Elecctronic vertical set  


Profilig spindles

Ø Spindel 50 mm
Spindle lenght 320 mm
Elecctronic vertical set  


Hardware grooving unit

Ø Spindel 40 mm
Spindle lenght 170 mm
2 vertical positions  


Glass stop recovery unit

Ø Spindle 30 mm
Ø Saw 200 mm


Radius unit

Ø Spindel 30 mm
Max tool Ø 180 mm



Change tools 12 stations  
Electrospindle with HSK quick coupling  
Motor power 8 kW
Rotation speed 900-18000 rpm
C Axis Rotation 360°


Technical data herewith can be subject to modification without notice. Please check with manufacturer for proper machine configuration.